How does nozzle flow change with pressure?

Nozzle flow scales with the square root of pressure: Q = Qr·√(P/Pr). Doubling the pressure raises flow by about 41%, so a small pressure change moves the application rate noticeably.

What is the broadcast application rate formula?

GPA = 5940 · Q / (S · W), where Q is gpm per nozzle, S is travel speed in mph and W is nozzle spacing in inches. The 5940 constant folds the acre, mile and minute unit conversions.

How high should a spray boom run?

Set boom height for a 30% double overlap: H = S·(1−0.30) / (2·tan(θ/2)), where S is nozzle spacing and θ is the full fan angle. Too low and the pattern streaks; too high and drift and overlap increase.

What is the flow rate of a XR110025 tip at 40 PSI?

The XR110025 is rated 0.25 gpm at 40 PSI. At 40 PSI the square-root pressure law gives 0.250 gpm.

What GPA does the XR110025 apply?

On a 20 in boom at 5 mph the XR110025 applies 14.9 GPA. GPA = 5940·Q / (S·W), so a faster pass or wider spacing lowers the rate.

How high should the boom run for the XR110025?

Set the boom to 4.9 in for a 30% double overlap with the XR110025's 110° fan. Too low streaks the pattern; too high increases drift and overlap.

TeeJet XR110025 GPA at 40 PSI

Broadcast GPA, nozzle output and tank coverage for a TeeJet XR110025 (Purple) tip at 40 PSI.

TeeJet XR110025 at 40 PSI

A XR110025 flat-fan tip (Purple, ISO 2.5) rated at 0.25 gpm and 40 PSI delivers 0.250 gpm at 40 PSI. On a 20 in boom at 5 mph that is 14.9 GPA, covering 13.5 acres per 200 gallon tank, with a 4.9 in boom height for 30% double overlap.

Nozzle output and broadcast GPA

Nozzle output and broadcast GPA is computed deterministically from the parameters encoded in this page's address, so the same inputs always produce the same result and the same OAS-XXXX verification hash.

Tank coverage and boom height

Tank coverage and boom height is computed deterministically from the parameters encoded in this page's address, so the same inputs always produce the same result and the same OAS-XXXX verification hash.

Worked example

Run the XR110025 tip at 40 PSI on a 20 in boom at 5 mph with a 200 gallon tank.

Worked example steps for this calculation
Step	Formula	Value
Nozzle output	Q = Qr·√(P/Pr)	0.250 gpm
Broadcast rate	GPA = 5940·Q / (S·W)	14.9 GPA
Tank coverage	A = tank / GPA	13.5 acres
Boom height	H = S·(1−0.30) / (2·tan(θ/2))	4.9 in

The XR110025 tip puts out 0.250 gpm at 40 PSI, applying 14.9 GPA and covering 13.5 acres per tank at a 4.9 in boom height.

Export this calculation

OAS-1248

Copy the engineering spec, export it as CSV, or print a shop ticket. Every export carries this route's parameter outputs, a timestamp and its OAS-1248 verification hash.

Engineering summary

Governing parameters and computed results for TeeJet XR110025 GPA at 40 PSI.

Governing parameters and computed results for this calculation
Parameter	Value
Nozzle	XR110025
Pressure	40
Nozzle Output (Q)	0.250 gpm
Application Rate (GPA)	14.85 gpa
Acres per Tank	13.47 ac
Boom Height (H)	4.9 in

Frequently asked questions

What is the flow rate of a XR110025 tip at 40 PSI?: The XR110025 is rated 0.25 gpm at 40 PSI. At 40 PSI the square-root pressure law gives 0.250 gpm.
What GPA does the XR110025 apply?: On a 20 in boom at 5 mph the XR110025 applies 14.9 GPA. GPA = 5940·Q / (S·W), so a faster pass or wider spacing lowers the rate.
How high should the boom run for the XR110025?: Set the boom to 4.9 in for a 30% double overlap with the XR110025's 110° fan. Too low streaks the pattern; too high increases drift and overlap.

Spray Nozzle & Boom Calibrator

Pressure-scaled nozzle output, broadcast application rate, tank coverage and optimal boom height for ISO 10605 and TeeJet spray tips.

Result

The XR110025 tip delivers 0.250 gpm at 40.0 psi, applying 14.85 gpa and covering 13.47 acres per 200 gal tank.

14.85gpa

Spray Program

Presets

Parameters

Spray Nozzle

Operating Pressure (P)

psi

Nozzle Spacing (S)

Travel Speed (W)

mph

Tank Size (V)

gal